Did not complete successfully exit code 137 is a common error message that many users encounter while using various software applications or systems. This error code often indicates a critical failure or an abnormal termination of a process, which can be caused by a variety of factors. In this article, we will delve into the possible causes of this error and provide some effective solutions to help you resolve the issue.
The exit code 137 is typically associated with the Unix-like operating systems, such as Linux and macOS. It signifies that the process was terminated by a signal that is considered to be fatal. This signal could be sent by the operating system itself or by another process, depending on the circumstances. In some cases, the error may be caused by a corrupted file, a faulty driver, or even a hardware issue.
One of the most common causes of the “did not complete successfully exit code 137” error is a corrupted file. This can happen when a file is not properly closed or when it becomes fragmented. To address this issue, you can try the following steps:
1. Identify the process that is causing the error. You can do this by checking the system logs or using a process monitor tool.
2. Once you have identified the process, try to terminate it gracefully. If this is not possible, you can force-terminate the process using the `kill` command.
3. After terminating the process, check the associated files for corruption. You can use a file integrity checker or a disk utility to scan for errors.
4. If a corrupted file is found, replace it with a healthy copy from a known good source.
Another potential cause of the error is a faulty driver. Device drivers are responsible for enabling communication between the hardware and the operating system. If a driver is outdated, corrupted, or incompatible, it can lead to various issues, including the “did not complete successfully exit code 137” error. To resolve this issue, follow these steps:
1. Identify the driver that is causing the problem by checking the system logs or using a driver management tool.
2. Update the driver to the latest version from the manufacturer’s website or using a driver update utility.
3. If updating the driver does not resolve the issue, try rolling back to a previous version of the driver.
4. If the problem persists, consider uninstalling the driver and reinstalling it from scratch.
In some cases, the “did not complete successfully exit code 137” error may be caused by a hardware issue. This could be due to a failing hard drive, a malfunctioning RAM module, or other hardware components. To diagnose and fix hardware-related issues, you can:
1. Run a comprehensive hardware diagnostic tool to check for any potential problems.
2. If a hardware issue is detected, replace the faulty component with a new one.
3. Perform a clean installation of the operating system to ensure that there are no lingering software issues.
In conclusion, the “did not complete successfully exit code 137” error can be caused by a variety of factors, including corrupted files, faulty drivers, and hardware issues. By following the steps outlined in this article, you should be able to identify the root cause of the error and take appropriate actions to resolve it.
